ATV61HU15M3 ATV61 1,5 KW 1,5 HP 240V 1 Phase EMC IP20

Variable Speed Drive

ATV61 1,5 kW 1,5 HP 240V 1 phase EMC IP20

Specifications

Main
Range of product : Altivar 61
Product or component type : Variable speed drive
Product specific application : Pumping and ventilation machine
component name : ATV61
Motor power kW :
0.75 kW, single phase at 200...240 V
1.5 kW, 3 phases at 200...240 V
Motor power hp :
1 hp, single phase at 200...240 V
2 hp, 3 phases at 200...240 V
power supply voltage : 200...240 V - 15...10 %
supply number of phases :
Single phase
3 phases
Line current :
11.3 A for 200 V 3 phases 1.5 kW / 2 hp
12 A for 200 V single phase 0.75 kW / 1 hp
9.6 A for 240 V 3 phases 1.5 kW / 2 hp
9.9 A for 240 V single phase 0.75 kW / 1 hp
EMC filter : Class C2 EMC filter integrated
Assembly style : With heat sink
Apparent power :
2.4 kVA at 240 V single phase 0.75 kW / 1 hp
4 kVA at 240 V 3 phases 1.5 kW / 2 hp
maximum prospective line Isc :
5 kA for 3 phases
5 kA for single phase
Maximum transient current :
5.7 A for 60 s, single phase
9.6 A for 60 s, 3 phases
Nominal switching frequency : 12 kHz
Switching frequency :
1...16 kHz adjustable
12...16 kHz with derating factor
asynchronous motor control :
Voltage/frequency ratio, 2 points
Flux vector control without sensor, standard
Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, 5 points
Synchronous motor control profile : Vector control without sensor, standard
Communication port protocol :
Modbus
CANopen
Type of polarization : No impedance for Modbus
Option card :
Communication card for APOGEE FLN
Communication card for BACnet
Communication card for CC-Link
Controller inside programmable card
Communication card for DeviceNet
Communication card for EtherNet/IP
Communication card for Fipio
I/O extension card
Communication card for Interbus-S
Communication card for LonWorks
Communication card for METASYS N2
Communication card for Modbus Plus
Communication card for Modbus TCP
Communication card for Modbus/Uni-Telway
Multi-pump card
Communication card for Profibus DP
Communication card for Profibus DP V1

Complementary
Product destination :
Asynchronous motors
Synchronous motors
power supply voltage limits : 170…264 V
power supply frequency : 50...60 Hz - 5...5 %
power supply frequency limits : 47.5...63 Hz
Continuous output current :
8 A at 12 kHz, 230 V - 3 phases
4.8 A at 12 kHz, 230 V - single phase
Output frequency : 0.1…599 Hz
Speed range : 1…100 in open-loop mode, without speed feedback
Speed accuracy : +/- 10 % of nominal slip 0.2 Tn to Tn without speed feedback
Torque accuracy : +/- 15 % in open-loop mode, without speed feedback
Transient overtorque
: 30 % of nominal motor torque +/- 10 % for 60 s
Braking torque :
<= 125 % with braking resistor
30 % without braking resistor
Regulation loop : Frequency PI regulator
Motor slip compensation :
- Automatic whatever the load
- Not available in voltage/frequency ratio (2 or 5 points)
- Can be suppressed
- Adjustable
diagnostic : 1 LED (red) for drive voltage
Output voltage : <= power supply voltage
electrical isolation : Between power and control terminals
type of cable for mounting in an enclosure :
With an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Electrical connection
Terminal 2.5 mm² / AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
Terminal 6 mm² / AWG 8 (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Tightening torque :
0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
1.4 N.m, 12.3 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Supply :
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 %, <10 mA with overload and short-circuit protection
Internal supply: 24 V DC (21…27 V), <200 mA with overload and short-circuit protection
External supply: 24 V DC (19…30 V)
analogue input number : 2
Analogue input type :
AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
sampling time :
2 ms +/- 0.5 ms (AI1-/Al1+) - analog input
2 ms +/- 0.5 ms (Al2) - analog input
2 ms +/- 0.5 ms (AO1) - analog output
2 ms +/- 0.5 ms (LI1...LI5) - discrete input
2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input
absolute accuracy precision :
+/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
+/- 0.6 % (AI2) for a temperature variation 60 °C
+/- 1 % (AO1) for a temperature variation 60 °C
Linearity error :
+/- 0.15 % of maximum value (AI1-/Al1+)
+/- 0.15 % of maximum value (AI2)
+/- 0.2 % (AO1)
analogue output number : 1
Analogue output type :
AO1 software-configurable current, analogue output range 0...20 mA, impedance: 500 Ohm, resolution 10 bits
AO1 software-configurable voltage, analogue output range 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V, 20 mA
Discrete output number : 2
Discrete output type :
Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
Configurable relay logic: (R2A, R2B) NO - 100000 cycles
maximum response time :
<= 100 ms in STO (Safe Torque Off)
R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 ms
R2A, R2B <= 7 ms, tolerance +/- 0.5 ms
Minimum switching current :
3 mA at 24 V DC for configurable relay logic
Maximum switching current
R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
R1, R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
R1, R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
Discrete input number : 7
Discrete input type :
Programmable (LI1...LI5)24 V DC (<= 30 V), with level 1 PLC - 3500 Ohm
Switch-configurable (LI6)24 V DC (<= 30 V), with level 1 PLC - 3500 Ohm
Switch-configurable PTC probe (LI6)0…6 probes - 1500 Ohm
Safety input (PWR)24 V DC (<= 30 V) - 1500 Ohm
Discrete input logic :
Negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
Acceleration and deceleration ramps :
- Automatic adaptation of ramp if braking capacity exceeded, by using resistor
- S, U or customized
- Linear adjustable separately from 0.01 to 9000 s
Braking to standstill
By DC injection
Protection type :
Against exceeding limit speed: drive
Against input phase loss: drive
Break on the control circuit: drive
Input phase breaks: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Overvoltages on the DC bus: drive
Power removal: drive
Short-circuit between motor phases: drive
Thermal protection: drive
Motor phase break: motor
Power removal: motor
Thermal protection: motor
Insulation resistance : > 1 mOhm 500 V DC for 1 minute to earth
Frequency resolution :
Analog input: 0.024/50 Hz
Display unit: 0.1 Hz
Connector type :
1 RJ45 (on front face) for Modbus
1 RJ45 (on terminal) for Modbus
Male SUB-D 9 on RJ45 for CANopen
Physical interface : 2-wire RS 485 for Modbus
Transmission frame : RTU for Modbus
Transmission rate :
- 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
- 9600 bps, 19200 bps for Modbus on front face
- 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
Data format :
- 8 bits, 1 stop, even parity for Modbus on front face
- 8 bits, odd even or no configurable parity for Modbus on terminal
Number of addresses :
- 1…127 for CANopen
- 1…247 for Modbus
Method of access : Slave CANopen
Marking : CE
Operating position : Vertical +/- 10 degree
Net weight : 3 kg
Width : 130 mm
height : 230 mm
Depth : 175 mm

Environment
Noise level : 43 dB conforming to 86/188/EEC
Dielectric strength :
2830 V DC between earth and power terminals
4230 V DC between control and power terminals
Electromagnetic compatibility :
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
standards :
UL Type 1
IEC 60721-3-3 class 3C1
EN 55011 class A group 1
IEC 60721-3-3 class 3S2
EN 61800-3 environments 2 category C2
EN 61800-3 environments 1 category C2
EN/IEC 61800-5-1
EN/IEC 61800-3
product certifications :
DNV
UL
NOM 117
GOST
C-Tick
CSA
Pollution degree :
2 conforming to EN/IEC 61800-5-1
degree of proctection
IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
IP21 conforming to EN/IEC 60529
IP21 conforming to EN/IEC 61800-5-1
IP41 on upper part conforming to EN/IEC 60529
IP41 on upper part conforming to EN/IEC 61800-5-1
IP54 on lower part conforming to EN/IEC 60529
IP54 on lower part conforming to EN/IEC 61800-5-1
Vibration resistance :
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance : 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity :
5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation :
-10…50 °C (without derating)
50…60 °C (with derating factor)
Ambient air temperature for storage : -25…70 °C
Operating altitude :
<= 1000 m without derating
1000...3000 m with current derating 1 % per 100 m

Packing Units
Unit Type of Package 1 : PCE
Number of Units in Package 1 : 1
Package 1 Height ; 23.5 cm
Package 1 Width : 24.5 cm
Package 1 Length : 30.5 cm
Package 1 Weight : 4.346 kg
Unit Type of Package 2 : S06
Number of Units in Package 2 : 10
Package 2 Height : 73.5 cm
Package 2 Width : 80 cm
Package 2 Length : 60 cm
Package 2 Weight : 56.46 kg

Contractual warranty
Warranty : 12 months