ATV630U15M3 Variable Speed Drive, Altivar Process ATV600, ATV630, 1.5k

Variable Speed Drive

variable speed drive, Altivar Process ATV600, ATV630, 1.5kW, 2hp, 200 to 240V, IP21, UL type 1

Keterangan
Penggerak kecepatan variabel Altivar Process ATV600 ini dapat memberi daya pada motor daya sinkron dan asinkron 3 fase. Ini memiliki 3 port komunikasi RJ45 bawaan sebagai standar, 1 port Ethernet, 2 port serial. Ia bekerja pada tegangan suplai pengenal dari 200V hingga 240V AC. Drive ini memberikan penghematan energi hingga 30% saat dalam keadaan siaga karena operasi ''Stop and Go'' yang inovatif tanpa biaya tambahan. Cocok untuk motor dengan tingkat daya hingga 1,5kW/2HP untuk aplikasi yang memerlukan beban berlebih (hingga 120%). Cocok untuk motor dengan rating daya hingga 0,75kW / 1hp untuk aplikasi yang memerlukan beban berlebih yang signifikan (hingga 150%). Beratnya 4,3kg dan dimensinya 144mm (lebar) x 203mm (dalam) x 350mm (tinggi). Penggerak ini difokuskan pada pemrosesan manajemen cairan dan penghematan energi, serta menawarkan fleksibilitas luas dalam aplikasi air dan air limbah, pertambangan, mineral dan logam, minyak dan gas, serta makanan dan minuman. Produk ini disertifikasi oleh ATEX INERIS, ATEX zone 2/22, CE, CSA, DNV-GL, UL dan TUV. Memenuhi standar UL 508C, EN/IEC 61800-3, EN/IEC 61800-5-1 dan IEC 61000-3-12. Aksesori (kit kipas, terminal tampilan grafis) dan opsi (modul ekspansi I/O, modul komunikasi, filter input EMC) tersedia pada drive Altivar Process ATV600, tergantung pada peringkat drive. Dirancang untuk dipasang pada posisi vertikal (+/- 10°) di dinding. Konsep penggerak baru ini memenuhi kebutuhan utama proses dan utilitas dalam hal efisiensi peralatan dan total biaya kepemilikan dengan mendukung manajemen energi, manajemen aset, dan juga kinerja proses secara keseluruhan.

Specifications

Main
Range of product : Altivar Process ATV600
Product or component type : Variable speed drive
Product specific application : Process and utilities
device short name : ATV630
Variant : Standard version
Product destination :
- Asynchronous motors
- Synchronous motors
EMC filter : Without EMC filter
IP degree of protection :
- IP21 conforming to IEC 61800-5-1
- IP21 conforming to IEC 60529
[Us] rated supply voltage : 200...240 V
Degree of protection : UL type 1 conforming to UL 508C
Type of cooling : Forced convection
Supply frequency : 50...60 Hz - 5...5 %
[Us] rated supply voltage : 200...240 V - 15...10 %
Motor power kW :
- 1.5 kW (normal duty)
- 0.75 kW (heavy duty)
Motor power hp :
- 2 hp normal duty
- 1 hp heavy duty
Line current :
- 5.9 A at 200 V (normal duty)
- 5 A at 240 V (normal duty)
- 3.3 A at 200 V (heavy duty)
- 3 A at 240 V (heavy duty)
Prospective line Isc : 50 kA
Apparent power :
- 2.1 kVA at 240 V (normal duty)
- 1.2 kVA at 240 V (heavy duty)
Continuous output current :
- 8 A at 4 kHz for normal duty
- 4.6 A at 4 kHz for heavy duty
Asynchronous motor control profile :
- Constant torque standard
- Variable torque standard
- Optimized torque mode
Synchronous motor control profile :
- Permanent magnet motor
- Synchronous reluctance motor
Speed drive output frequency : 0.1…500 Hz
Nominal switching frequency : 4 kHz
Switching frequency :
- 2...12 kHz adjustable
- 4...12 kHz with derating factor
Safety function : STO (safe torque off) SIL 3
discrete input logic : 16 preset speeds
communication port protocol :
- Modbus serial
- Ethernet
- Modbus TCP
Option card :
- Slot A: communication module, Profibus DP V1
- Slot A: communication module, PROFINET
- Slot A: communication module, DeviceNet
- Slot A: communication module, Modbus TCP/EtherNet/IP
- Slot A: communication module, CANopen daisy chain RJ45
- Slot A: communication module, CANopen SUB-D 9
- Slot A: communication module, CANopen screw terminals
- Slot A/slot B: digital and analog I/O extension module
- Slot A/slot B: output relay extension module
- Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
- Communication module, BACnet MS/TP
- Communication module, Ethernet Powerlink

Complementary
Mounting mode : Wall mount
Maximum transient current :
- 8.8 A during 60 s (normal duty)
- 6.9 A during 60 s (heavy duty)
Network number of phases : 3 phases
Discrete output number : 0
Discrete output type :
- Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
- Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
- Relay outputs R2A, R2C 250 V AC 5000 mA
- Relay outputs R2A, R2C 30 V DC 5000 mA
- Relay outputs R3A, R3C 250 V AC 5000 mA
- Relay outputs R3A, R3C 30 V DC 5000 mA
Output voltage : <= power supply voltage
Permissible temporary current boost :
- 1.1 x In during 60 s (normal duty)
- 1.5 x In during 60 s (heavy duty)
Motor slip compensation :
- Automatic whatever the load
- Can be suppressed
- Adjustable
- Not available in permanent magnet motor law
Acceleration and deceleration ramps : Linear adjustable separately from 0.01...9999 s
Physical interface :
- Ethernet
- 2-wire RS 485
Braking to standstill : By DC injection
Protection type :
- Thermal protection: motor
- Safe torque off: motor
- Motor phase break: motor
- Thermal protection: drive
- Safe torque off: drive
- Overheating: drive
- Overcurrent between output phases and earth: drive
- Overload of output voltage: drive
- Short-circuit protection: drive
- Motor phase break: drive
- Overvoltages on the DC bus: drive
- Line supply overvoltage: drive
- Line supply undervoltage: drive
- Line supply phase loss: drive
- Overspeed: drive
- Break on the control circuit: drive
Transmission rate :
- 10, 100 Mbits
- 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Frequency resolution :
- Display unit: 0.1 Hz
- Analog input: 0.012/50 Hz
Transmission frame : RTU
Electrical connection :
- Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
- Motor: screw terminal 2.5...6 mm²/AWG 14...AWG 10
- Line side: screw terminal 2.5...6 mm²/AWG 14...AWG 10
Connector type :
- RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
- RJ45 (on the remote graphic terminal) for Modbus serial
Data format : 8 bits, configurable odd, even or no parity
Type of polarization : No impedance
Exchange mode : Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Number of addresses : 1…247 for Modbus serial
Method of access : Slave Modbus TCP
Supply :
- External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
- Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
- Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Local signalling :
- 3 LEDs for local diagnostic
- 3 LEDs (dual colour) for embedded communication status
- 4 LEDs (dual colour) for communication module status
- 1 LED (red) for presence of voltage
Width : 144 mm
Height : 350 mm
Depth : 203 mm
Net weight : 4.3 kg
Analogue input number : 3
Analogue input type :
- AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
- AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
- AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Discrete input number : 8
Discrete input type : DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
Input compatibility :
- DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
- DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
- STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logic :
- Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
- Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
Analogue output number : 2
Analogue output type :
- Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
- Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
- Software-configurable current DQ-, DQ+: 30 V DC
- Software-configurable current DQ-, DQ+: 100 mA
Sampling duration :
- 2 ms +/- 0.5 ms (DI1...DI4) - discrete input
- 5 ms +/- 1 ms (DI5, DI6) - discrete input
- 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
- 10 ms +/- 1 ms (AO1) - analog output
Accuracy :
- +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
- +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity error :
- AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
- AO1, AO2: +/- 0.2 % for analog output
Relay output number : 3
Relay output type :
- Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
- Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
- Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Refresh time : Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Minimum switching current : Relay output R1, R2, R3: 5 mA at 24 V DC
Maximum switching current
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
isolation : Between power and control terminals
Maximum output frequency : 500 kHz
Maximum input current : 5.9 A
Variable speed drive application selection :
- Building - HVAC compressor centrifugal
- Food and beverage processing other application
- Mining mineral and metal fan
- Mining mineral and metal pump
- Oil and gas fan
- Water and waste water other application
- Building - HVAC screw compressor
- Food and beverage processing pump
- Food and beverage processing fan
- Food and beverage processing atomization
- Oil and gas electro submersible pump (ESP)
- Oil and gas water injection pump
- Oil and gas jet fuel pump
- Oil and gas compressor for refinery
- Water and waste water centrifuge pump
- Water and waste water positive displacement pump
- Water and waste water electro submersible pump (ESP)
- Water and waste water screw pump
- Water and waste water lobe compressor
- Water and waste water screw compressor
- Water and waste water compressor centrifugal
- Water and waste water fan
- Water and waste water conveyor
- Water and waste water mixer
Motor power range AC-3 : 1.1…2 kW at 200…240 V 3 phases
Quantity per set : 1
Enclosure mounting : Wall mounted

Environment
Insulation resistance : > 1 MOhm 500 V DC for 1 minute to earth
Noise level : 54.5 dB conforming to 86/188/EEC
Power dissipation in W :
- Natural convection: 29 W at 200 V, switching frequency 4 kHz
- Forced convection: 53 W at 200 V, switching frequency 4 kHz
Volume of cooling air : 38 m3/h
Operating position : Vertical +/- 10 degree
Maximum THDI : <48 % full load conforming to IEC 61000-3-12
Electromagnetic compatibility :
- Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Pollution degree : 2 conforming to EN/IEC 61800-5-1
Vibration resistance :
- 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
- 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Shock resistance : 15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity : 5…95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation :
- -15…50 °C (without derating)
- 50…60 °C (with derating factor)
Ambient air temperature for storage : -40…70 °C
Operating altitude :
- <= 1000 m without derating
- 1000...4800 m with current derating 1 % per 100 m
product certifications :
- ATEX INERIS
- CSA
- TÜV
- ATEX zone 2/22
- DNV-GL
- UL
Marking : CE
Standards :
- UL 508C
- EN/IEC 61800-3
- EN/IEC 61800-3 environment 1 category C2
- EN/IEC 61800-3 environment 2 category C3
- EN/IEC 61800-5-1
- IEC 61000-3-12
- IEC 60721-3
- IEC 61508
- IEC 13849-1
Overvoltage category : III
Regulation loop : Adjustable PID regulator
Noise level : 54.5 dB
Pollution degree : 2

Packing Units
Unit Type of Package 1 : PCE
Number of Units in Package 1 : 1
Package 1 Height : 31.500 cm
Package 1 Width : 19.000 cm
Package 1 Length : 40.500 cm
Package 1 Weight : 5.892 kg
Unit Type of Package 2 : P06
Number of Units in Package 2 : 6
Package 2 Height : 75.000 cm
Package 2 Width : 60.000 cm
Package 2 Length : 80.000 cm
Package 2 Weight : 48.352 kg