ATV680C11Q4X1 Variable Speed Drive, Altivar Process ATV600, Low Harmon

Variable Speed Drive

Variable speed drive, Altivar Process ATV600, Low Harmonic System ATV680, 110/90 kW, 400 V, IP23

Spesifikasi

Main
Device short name : ATV680
Product destination :
- Asynchronous motors
- Synchronous motors
IP degree of protection : IP23 conforming to IEC 61800-5-1
Supply frequency : 50/60 Hz +/- 5 %
Network number of phases : 3 phases
Range of produc : Altivar Process ATV600
Product or component type : Variable speed drive
Product specific application : Process and utilities
communication port protocol :
- EtherNet/IP
- Modbus TCP
- Modbus serial
[Us] rated supply voltage : 380...415 V - 10...6 %
Motor power kW :
- 110 kW for normal duty
- 90 kW for heavy duty

Complementary
Provided equipment :
- Enclosure Spacial SF
- Graphical operating panel in the enclosure door
- Main switch
- Semiconductor fuses
- Clean power filter with EMC filter
- Active infeed converter module
- Frequency inverter
- Terminal block main supply
- Terminal block motor
Colour of enclosure : Light grey (RAL 7035)
Type of cooling : Forced convection
Output voltage : <= power supply voltage
Permissible temporary current boost :
1.1 x In during 60 s (normal duty)
1.5 x In during 60 s (heavy duty)
Speed drive output frequency : 0.1…500 Hz
Speed accuracy :
- V/f mode: slip frequency
- VC without feedback: 0.3 x slip frequency
Continuous output current :
- 211 A at 2.5 kHz for normal duty
- 173 A at 2.5 kHz for heavy duty
Energy efficiency ratio : 0.965
Power dissipation in W :
- 4220 W, total (normal duty)
- 3480 W, total (heavy duty)
- 560 W, control part (normal duty)
- 470 W, control part (heavy duty)
Volume of cooling air :
- 1160 m3/h for power
- 140 m3/h for control
Prospective line Isc : 50 kA for 100 ms
Motor recommanded cable cross section :
1 x (3 x 120 mm²) (normal duty)
2 x (3 x 50 mm²) (normal duty)
1 x (3 x 95 mm²) (heavy duty)
Height : 2150 mm
Depth : 664 mm
Safety function : STO (safe torque off), level SIL 3 for <= 100 ms
Protection type :
Motor: thermal protection
Motor: safe torque off
Motor: motor phase break
Drive: thermal protection
Drive: safe torque off
Drive: overheating
Drive: overcurrent (between output phases and earth)
Drive: overload (output)
Drive: short-circuit protection
Drive: motor phase break
Drive: overvoltage (DC bus)
Drive: line supply overvoltage
Drive: line supply undervoltage
Drive: line supply phase loss
Drive: overspeed
Drive: break on the control circuit
Drive: short-circuit protection with semi-conductor fuse (main supply)
Drive: fan monitoring
Frequency resolution :
- Display unit: 0.1 Hz
- Analog input: 0.012/50 Hz
Connector type :
- RJ45 (on the control block) for Modbus serial
- RJ45 (on the control block) for Ethernet IP/Modbus TCP
Physical interface : 2-wire RS 485 for Modbus serial
Transmission frame : RTU for Modbus serial
Transmission rate :
- 10/100 Mbit/s for Ethernet IP/Modbus TCP
- 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Exchange mode : Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Data format : 8 bits, configurable odd, even or no parity for Modbus serial
Type of polarization : No impedance for Modbus serial
Number of addresses : 1…247 for Modbus serial
Supply :
- External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
- Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
- Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Local signalling : LCD display unit front door operation function, status and configuration
Input compatibility
- DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
- DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
- STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logic :
- Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1)
- Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1)
- Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1)
- Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
Sampling duration :
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AQ1, AQ2) - analog output
Accuracy :
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Linearity error :
- AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
- AQ1, AQ2: +/- 0.2 % for analog output
Refresh time : Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Isolation : Between power and control terminals
Insulation resistance : > 1 MOhm 500 V DC for 1 minute to earth
Relative humidity : 5…95 % without condensation conforming to IEC 60068-2-3
Option card :
Slot A: communication module, Profibus DP V1
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Discrete input number : 8
Discrete input type :
- DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
- DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
- STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2200 kOhm
Discrete input logic : 16 preset speeds
analogue input number : 3
Analogue input type :
- AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits
- AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
analogue output number : 2
Analogue output type :
- Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
- Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Relay output number : 3
Relay output type :
- Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
- Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
- Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Maximum switching current :
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Minimum switching current : Relay output R1, R2, R3: 5 mA at 24 V DC
Method of access : Slave Modbus TCP
Asynchronous motor control profile :
- Variable torque standard
- Constant torque standard
- Optimized torque mode
Synchronous motor control profile : Permanent magnet motor
Acceleration and deceleration ramps :
- Linear adjustable separately from 0.01 to 9000 s
- S, U or customized
Motor slip compensation :
- Automatic whatever the load
- Adjustable
- Can be suppressed
- Not available in permanent magnet motor law
Switching frequency : 2...8 kHz adjustable with derating factor
Nominal switching frequency : 2.5 kHz
Braking to standstill : By DC injection
Line current :
- 175 A at 400 V (normal duty)
- 144 A at 400 V (heavy duty)
Apparent power :
- 121 kVA at 400 V (normal duty)
- 100 kVA at 400 V (heavy duty)
Maximum transient current :
- 232 A during 60 s per 10 min (normal duty)
- 260 A during 60 s per 10 min (heavy duty)
Short-circuit protection :
- Upstream: 250 A gG fuse (normal duty)
- Upstream: 250 A gG fuse (heavy duty)
- Internal: 250 A aR fuse
Electrical connection :
- Removable screw terminals, clamping capacity: 0.5...1.5 mm² for control
- M12 bar for main supply
- M12 bar for motor
Cable entry : Bottom
Width : 600 mm
Net weight : 400 kg

Environment
Noise level : 70 dB conforming to 86/188/EEC - physical agents (noise) directive
EMC filter :
- Integrated conforming to EN/IEC 61800-3, category C3, shielded cable with 50 m
- Integrated conforming to EN/IEC 61800-3, category C4, unshielded cable with 80 m
Pollution degree : 2 conforming to EN/IEC 61800-5-1
Vibration resistance :
- 1.5 mm peak to peak (f= 3…10 Hz) conforming to IEC 60068-2-6
- 0.6 gn (f= 10…200 Hz) conforming to IEC 60068-2-6
- 3M3 conforming to IEC 60721-3-3
Shock resistance :
- 4 gn for 11 ms conforming to IEC 60068-2-27
- 3M2 conforming to IEC 60721-3-3
Operating altitude :
< 1000 m without derating
1000...2000 m with current derating 1 % per 100 m
2000...3800 m with current derating 1 % per 100 m for TT earthing system
2000...3800 m with current derating 1 % per 100 m for TN earthing system
2000...3800 m with current derating 1 % per 100 m for IT earthing system
3800...4800 m with current derating 1 % per 100 m for TT earthing system
3800...4800 m with current derating 1 % per 100 m for TN earthing system
Environmental characteristic :
- Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
- Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
- Humidity resistant class 3K3 conforming to EN/IEC 60721-3-3
Product certifications :
- ATEX
- C-Tick
- EAC
Operating position : Vertical +/- 10 degree
Marking : CE
Standards :
- EN/IEC 60204-1
- EN/IEC 61800-2
- EN/IEC 61800-3
- EN/IEC 61800-5-1
Maximum THDI : <5 % full load conforming to IEC 61000-3-12
Assembly style : In floor-standing enclosure low harmonic version
Electromagnetic compatibility :
- Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Overvoltage category : III
Ambient air temperature for operation :
-10…0 °C without derating (with option enclosure heating)
0…40 °C without derating
40…50 °C with derating factor
Ambient air temperature for storage : -25…70 °C

Packing Units
Unit Type of Package 1 : PCE
Number of Units in Package 1 : 1
Package 1 Height : 215 cm
Package 1 Width : 66.9 cm
Package 1 Length : 60 cm
Package 1 Weight : 445 kg
Unit Type of Package 2 : CAR
Number of Units in Package 2 : 1
Package 2 Height : 230 cm
Package 2 Width : 80 cm
Package 2 Length : 75 cm
Package 2 Weight : 445 kg