BMXCPS3522H Redundant Power Supply Module X80 - 125 V DC - For Severe

Power Supply Module

redundant power supply module X80 - 125 V DC - for severe environments

Specifications

Main
Range of produc : Modicon X80
Product or component type : Power supply module
backplane compatibility : All backplane
Product specific application : For severe environments
advanced diagnostics available via network :
- Temperature sensing
- Redundancy information
- Redundancy test
- Uptime duration
- Remaining lifetime
Primary voltage : 125 V
Supply circuit type : DC
Secondary power :
- 18 W 3.3 V DC at -25…70 °C I/O module logic power supply
- 40 W 24 V DC at -25…70 °C I/O module power supply and processor if 3.3 V not loaded

Complementary
Primary voltage limit : 100...150 V
Input current : 600 mA 125 V
Inrush current : 60 A 125 V
I²t on activation : 2.5 A².s 125 V
It on activation : 0.09 A.s 125 V
MTBF reliability : 830000 H
Protection type :
- Internal fuse not accessible for primary circuit
- Overload protection for secondary circuit
- Overvoltage protection for secondary circuit
- Short-circuit protection for secondary circuit
Current at secondary voltage :
1.67 A 24 V DC I/O module power supply and processor
5 A 3.3 V DC I/O module logic power supply
maximum power dissipation in W : 8.5 W
Status LED :
1 LED (green) presence of voltages (OK)
1 LED (green) redundancy OK
1 LED (green) power supply status
control type : RESET push-button cold restart
Electrical connection :
1 connector 2 pin(s)alarm relay
1 connector 5 pin(s)line supply, protective earth
Insulation resistance :
>= 100 MOhm primary/ground
>= 100 MOhm primary/secondary
Net weight : 0.61 kg

Environment
Immunity to microbreaks : 1 ms
Dielectric strength :
- 1500 V primary/secondary I/O module logic power supply
- 1500 V primary/secondary I/O module power supply and processor
- 2300 V primary/secondary sensor power supply
- 1500 V primary/ground
IP degree of protection : IP20
Directives :
- 2014/35/EU - low voltage directive
- 2014/30/EU - electromagnetic compatibility
Product certifications :
- CE
- UL
- CSA
- RCM
- EAC
- Merchant Navy
Standards :
- EN 61131-2
- EN/IEC 61010-2-201
- UL 61010-2-201
- CSA C22.2 No 61010-2-201
- IACS E10
- EN/IEC 61000-6-5, interface type 1 and type 2
- EN/IEC 61850-3, location G
Environmental characteristic :
- Gas resistant class Gx conforming to ISA S71.04
- Gas resistant class 3C4 conforming to IEC 60721-3-3
- Dust resistant class 3S4 conforming to IEC 60721-3-3
- Sand resistant class 3S4 conforming to IEC 60721-3-3
- Salt resistant level 2 conforming to IEC 68252
- Mold growth resistant class 3B2 conforming to IEC 60721-3-3
- Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
- Hazardous location class I division 2
Ambient air temperature for storage : -40…85 °C
ambient air temperature for operation : -25…70 °C
Relative humidity : 10…95 % without condensation
Protective treatment : Conformal coating

Packing Units
Unit Type of Package 1 : PCE
Number of Units in Package 1 : 1
Package 1 Height : 9.0 cm
Package 1 Width : 18.0 cm
Package 1 Length : 25.0 cm
Package 1 Weight : 740.0 g
Unit Type of Package 2 : S03
Number of Units in Package 2 : 6
Package 2 Height : 30.0 cm
Package 2 Width : 30.0 cm
Package 2 Length : 40.0 cm
Package 2 Weight : 4.44 kg