FLOE000010 - Carel Flooding Detector 2 Modules DIN-RAIL

Sensor Controller

FLOE000010 - Flooding Detector 2 Modules DIN-RAIL

The new Carel flood detecting device, the FLOE000010, is able to sense the presence of water in an environment.
It is generally used to protect against flooding in computer rooms, offices, laboratories, special environments. It is made up of a detector (normally fitted on the electrical panel) and a sensor (installed in the position being checked).
When the sensor is wet by the water, the alarm is automatically activated on the detector, switching the status of the relay.

Power supply : 24 Vac (-15%...+10%), 50/60 Hz
Power input : 1.5 VA
Operating conditions : -10T60 °C, <90% H.R. non-condensing
Alarm relay output circuit : 250 Vac 2 A resisitive, 2 A inductive, cosfi=0.4, 2 (2) A, according to EN60730-1 (100.000 cycles)
MAximum length of the probe connection cable : 500 m with single wire cable and double insulation
Cross-section of the connection cable : 1.5 mm²
Standard compliance : CE EN 6000-6-2, EN 6000-6-4 (EMC), EN 61010-1 (safety)
Index of protection : IP40