SPKT00L1S0 - Carel Perssure Sensor

Pressure Sensor

Carel SPKT00L1S0 – 0…90bar – 7/16″ – pressure transducer 0-5V female

Electrical information

Power supply : (protected against polarity reversal) 5 Vdc ±10%
Power supply : overvoltage 24 Vdc
Current draw : max 8 mA
Output voltage : 0.5-4.5 Vdc ratiometric
Short-circuit protection : yes
Output load : >5 k?
Response time : <5 ms, 0~99% FS
Insulation resistance : > 10 MO @ 500 VDC
Electrical connector : Male, 3-pin Metri-Pack 150
Cable : See SPKC****** accessory

Performance information

Operating temperature : -40T135°C
Fluid temperature : -40T135°C
Storage temperature : -40T125°C
Ingress protection : IP55 or IP67 depending on the connector plugged in. For more details, see SPKC****** accessory table.
Total error band (including linearity, hysteresis, : ±1% FS at 5 Vdc (0T50°C)
repeatability, calibration error) relative to all operating : ±2% FS at 5 Vdc (0T80°C)
temperature and humidity values:
±4% FS at 5 Vdc (-40T125°C)
Life cycle : > 10 million cycles, 0-100% FS at 25°C


Physical information

Vibrations IEC 60068-2-64 : 5-2000 Hz / 10 g – in direction x – y – z
Shock IEC 60068-2-27 : 20 g sinusoidal, 11 ms
Drop from any axis : 1.0 m (falling from 1 metre high)
Material in contact with refrigerant : AISI 316L stainless steel
Housing : AISI 316L stainless steel
Tightening torque : 12 to 16 Nm
Mechanical connection: Female, 7/16”-20UNF – 45° flare
Pressure range : From 4.2 barg to 90 barg
Over pressure : 2.5 times pressure range, see table
Burst pressure : 300 bar
Refrigerant compatibility : All refrigerants compatible with AISI 316L stainless steel
Vacuum pressure (referred to refrigerant circuit) : not available
Weight : 55g (net weight)